Venetian blinds
measuring instructions

The long and faultless operation of the window covering depends not only on its high quality of workmanship but also on its proper fitting and installation. To ensure the covering fits perfectly, the chosen location must be properly and carefully measured.
The following auxiliary drawings must be strictly adhered to.

Installation in between the glazing beads
  • A - WIDTH This is the width of the "light" of the glass (not including the gasket).
  • B - HEIGHT This is the height of the "light" of the glass (not including the gasket).
  • I - WINDOW FRAME
  • II - GLAZING BEAD
  • III - GLASS
Mounting on glazing beads
  • A - WIDTH It is the width of the glass together with the glazing beads.
  • B - HEIGHT It is the height of the glass together with the glazing beads.
  • I - WINDOW FRAME
  • II - GLAZING BEAD
  • III - GLASS
Non-invasive installation on the window sash
  • A - WIDTH It is the width of the glass together with the glazing beads.
  • B - HEIGHT This is the height of the window sash
  • I - WINDOW FRAME
  • II - GLAZING BEAD
  • III - GLASS
Installation inside the window recess
help wymiar z3 edit.jpg (114 KB)
  • A - WINDOW RECESS WIDTH If the recess width is not the same at all points, the smallest recess dimension should be taken. 5mm is the distance that should be subtracted from the width of the window recess for easy installation of blinds.
  • B - WINDOW RECESS HEIGHT If the recess height is not the same at all points, the smallest recess dimension should be taken. 5mm is the distance that should be subtracted from the height of the window recess for easy installation of blinds.

*Remember that when the blinds are rolled up, the height of the mechanism will increase by the thickness of the slat pack, which in some cases may interfere with the opening of the window.

*The heights of the lamella packages can be found in the descriptions of the blinds.

Wall mounting
help wymiar z4 edit.jpg (126 KB)
  • A - BLIND WIDTH
  • B - BLIND HEIGHT
  • C - WINDOW RECESS WIDTH
  • D - WINDOW RECESS HEIGHT

Use this option if you want to install the blinds on the wall. We suggest that the shutter is about 8-10cm wider and 8-10cm higher than the window recess, so that there are no gaps.

The height of the louver package after being rolled up together to the top profile and the bottom profile

System 25mm
top rail 25mm
bottom rail 10mm

PurePure
rope ladder

BambooBamboo
rope ladder

*It should be taken into account that the height of the cassette is fixed and for 25mm blinds it is 35mm.

Maximum dimensions:
  • Maximum width of wooden blinds - 270cm (2700mm)
  • Maximum width of bamboo blinds - 180cm (1800mm)
  • Maximum height for both - 300cm (3000mm)

*All dimensions are given in millimeters

**There may be slight differences in the height of the blinds. The tolerance of differences is from -5 mm to +35 mm.