Measuring

Measuring instructions Roller blind MG, MGS

Long and trouble-free operation of the window shutter depends not only on the high quality of its workmanship, but also on its correct fitting and assembly. For the diaphragm to fit perfectly, the chosen location must be correctly and carefully dimensioned.
The following auxilary drawings must be strictly adhered to.

Bolted - window recess

A - WINDOW RECESS WIDTH If the width of the recess at all points is not the same, the smallest dimension of the recess should be taken. 5mm is the distance to be subtracted from the width of the window recess for free installation of the roller blind.
B - WINDOW RECESS HEIGHT If the height of the recess at all points is not the same, the smallest dimension of the recess should be taken. 5mm is the distance to be subtracted from the height of the window recess for free installation of the roller blind.

Bolted - wall or ceiling

A - BLIND FABRIC WIDTH
B - BLIND HEIGHT
C - WINDOW RECESS WIDTH
D - HEIGHT OF THE WINDOW RECESS

Use this option if you want to install the blind on the wall. We suggest that the blind be about 8-10 cm wider and 8-10 cm higher than the window recess, so that there are no gaps.

*The upper mechanism of the blind takes about 8 cm in height

Additional informations and comments

Thanks to the integrated protective collar, the blind aesthetically resembles cassette models. It additionally ensures lateral guidance of the material. For custom orders, it is possible to use a bearing rail connector, which allows for the assembly of several blinds closely together, with minimal gaps between the fabrics.

To order a blind with this connector, please describe this in the "comments" field to let us know and discuss the details.

*All dimensions are given in millimeters

Dimensional algorithm
• Pipe – dimension A +4 mm
• Fabric – dimension A
• Weight beam – dimension A
• Support profile MG S
– dimension A +15 mm
• Cover profile MG S
– dimension A +15 mm
• Attachment profile MG S
– dimension A +15 mm